CPM146-800W Internal Controller
AED: 670.00(Excl. VAT)
Quick Specs
| Input Power (W): 800 | DC Voltage Range (VDC): 40 ~ 90 | Max Flow Range (m3/hr): 5.5 |
| Max Head Range (m): 35 | Outlet Size (Inch): 1 | Controller Type: Internal |
Features
- Voltage: 40–90 Vmp / 100 VOC — IDC max 10A — max input 0.8 kW
- Max flow 5.5 m3/h (92 L/min) / Max head 35m / RPM 500–4000
- Built-in controller — no external unit required
- BLDC motor with MPPT and vector control — MPPT efficiency max 99%
- Soft start / Dry run / Lost phase / Stall / Over-temperature protection
8 in stock
Introduction
The Maxima CPM146-800W is an 800W DC solar centrifugal surface pump delivering up to 5.5 m3/h
flow and 35m head, operating from 3 pcs of 340W panels with a fully built-in controller.
General Description
The CPM146-800W operates at 40–90 Vmp / 100 VOC with a maximum input current of 10A DC
and a maximum input power of 0.8 kW, recommended with 3 pcs of 340W panels in series. It delivers
a maximum flow of 5.5 m3/h (92 L/min) at a maximum head of 35m. The controller is fully built-in.
The pump features a high-efficiency BLDC motor with MPPT and vector control, MPPT efficiency
max 99%, soft start, and a Rp 1″ × 1″ outlet. Motor speed 500–4000 RPM, max water temp 40°C,
insulation class F, IP54 rated. Pump unit weighs 10 kg. Copper impeller and cast iron housing. CE
and ISO 9001:2015 certified.
Flow and Head Performance
Delivers 5.5 m3/h flow at 35m max head
from 3 pcs of 340W panels.
Built-in Controller
Fully integrated controller — no separate control unit,
wiring, or mounting required.
3-Panel Configuration
Recommended with 3 pcs of 340W panels in series
at 60–110 Vmp / 150 VOC.
| Weight | 11 kg |
|---|---|
| Dimensions | 0.425 × 0.425 × 0.3 mm |
