SKP – 4SP5 – 15

AED: 3,400.00

SKU: SKP-4SP5-15 Category:
Quick Specs
Depth/Flow nom.:

75m: 5m3/hr

Depth/Flow Min:

160m: 1m3/hr

Depth/ Flow Max:

10m: 8.7m3/hr

Power: 3HP Max Voltage: 440Voc Vmpp Range: 60-380Vdc
Recomm PV:

3000W±20%

Output:

1.5″

Motor diameter:

99mm

Features
  • Powered by AC / DC
  • MPPT controller integrated in motor
  • Integrated dry running protection
  • Reverse polarity protection
  • Over-head, Over-load, over-current protections

28 in stock

For more information
+971 4 552 4462
info@maxima.solar

28 IN STOCK

Introduction

Maxima solar pumps employ the most efficient and user-friendly setup to make the pump easy to use. All the necessary power drives and electronics to control and optimize the pumps’ performance are fully integrated and built inside the motor, making the pump set’s operation “PLUG AND PLAY” – just connect the solar panels to it and it runs – most efficiently.

Design Feature

Maxima DC pumps use permanent-magnet motor technology that assures high efficiency. This entails smaller number of PV modules in the system.

Additionally, a completely integrated motor is designed to have NO-Maintenance. This makes Maxima pump’s idea for supplying water in remote difficult to reach areas, where the normal grid supply is either inconsistent or completely unavailable.

Integrated Protection

The inverter included and endure high voltage fluctuations from the grid, keeping the system on even during steep voltage drops.

Modified Sine Wave

Maxima DC pumps’ centrifugal range has a unique dry-running protection function. No additional probe or float switch is required to detect the condition. A delta-T of 30 mins assures that there is a minimum of 30 minutes delay between stop and start cycle.

Construction Features

  1. Multistage centrifugal type with datial or semi-axial impellers
  2. Pump and Motor coupled via direct-rigid coupling
  3. SS impellers on ‘floating clearance rings (synthetic low abrasion material)” to minimize wear and tear
  4. All wetted material is SS 304
  5. Check valve incorporated in head to prevent back flow
  6. Wet end design for improved life and lower maintenance

Recommended Accessories

  1. Monitor
  2. GPRS/RMS System
  3. Float switch for tank
  4. Epoxy Resin water proof joints for cables
  5. Surge protection device (DC)
  6. Surge Protection device (AC) – if using grid supply
  7. DC Breaker
  8. AC Breaker
  9. Flow Meter
Weight 21.5 kg
Dimensions 1088 × 99 × 468 mm

Catalogue


Forest
DC Pumps – Catalogue

Certification


Forest
TUV DC Pumps – Certificate

Usage Information


Forest
Installation Guide

Data Sheet

Forest
SKP – 4SP5 – 15 – DataSheet

Recommended Components to Complete Your System